Skip to main content Skip to search Skip to main navigation


Good to know
adhesive spray, aerosol can, spray adhesive, metal container, red nozzle

Design of an aerosol can

Liquids can be evenly distributed and conveniently dispensed using an aerosol can. Since it was first patented in 1927, the aerosol can has become an established component in various areas of life. One of its most popular applications was the invention of hairspray back in the 50's. Whether hairspray, deodorant, paint, cleaner or even whipped cream - today the aerosol can is an inherent part of our daily lives and is used in various areas.

But how does an aerosol can actually work?

The can generally consists of a metal container made from aluminium or tin plate, and it is pressurised. Inside, there is a plastic uptake pipe that goes all the way down to the bottom. It is open at the bottom and connected to the valve or spray nozzle at the top.

Let's take a look at our adhesive spray, for example. The can is full of liquid glue as well as a propellant. The propellant is responsible for the following: It must produce the necessary pressure to express the product out of the can evenly. When spraying, the liquid, or active ingredient, is sprayed out in many droplets. The propellant is a mixture of propane and butane.

When the can is filled, the gas is put under so much pressure that it turns to liquid and partially mixes with the active ingredient. Since propane butane in its gaseous state is lighter than the active ingredient, the non-mixed portion settles above the liquid.

This is called the expansion chamber. This is where sufficient pressure is created in order to transport the product outwards when the spray nozzle is actuated. The less liquid there is in the container, the more the gas expands. This ensures even pressure and that the can will be emptied completely.

High pressure

In most cans the pressure is between three and five bar, in other words, more than in a car tyre. There is a risk of the can bursting at temperatures higher than 50 degrees. The concave base of the aerosol can counteracts bursting of the can. However, it must be protected from direct sunlight and high temperatures. For this reason, cans that have an convex base should no longer be used.

In addition to the classic propellant propane butane, there are various gases, for instance nitrogen, that are also used. These are generally non-flammable, however they may have less constant pressure and a less even spray pattern. For this reason they are used wherever propane butane is undesirable as a propellant, for instance for non-flammable sprays or for products like hand protection foam, shaving foam or whipped cream.

The valve

The most important element of the can is the valve. There are various valve designs. There is a spring situated inside the plastic pipe on most frequently used valves. When you press the spray nozzle, it is pressed down and the valve opens. Thanks to the pressure inside the can, the propellant-active ingredient mixture can now escape through the uptake pipe, valve and spray nozzle. To ensure that the valve doesn’t get clogged after use, depending on the valve it may be necessary to spray the can upside down so that some of the propellant escapes thereby cleaning the valve. But be careful: This shouldn’t be done too often or with too much force, otherwise too much of the propellant will be lost. In addition, there is also the ball valve that you can spray from any position – even upside down. This valve is primarily used for liquid active ingredients, like cleaners for instance. The pigments in the paint or metal sprays can make the ball stick inside, which stops the valve from working. Another alternative to this is the self-cleaning VPH valve with gas-phase opening where both the media and the propellant are emitted simultaneously. This causes virtually no sticking or residue. Another general rule is: The complexity of the valve is reflected in the price. We use a spray nozzle for our metal sprays that is tilted 10 degrees upward. This means that the spray emits at an angle of ten degrees upwards so that the can doesn’t also get sprayed.

Always shake well

A general rule: Always shake aerosol cans well before use in order to mix the propellant with the medium. In addition, small balls are added in metal sprays or in paints that mix up the metal or colour pigment deposits at the bottom of the can. The clicking sound is the ball hitting the walls of the can.

This enables easy and convenient dispensing of many products, like hairspray, deodorant, de-icer, fitting spray, ironing spray or the classic oven spray. The aerosol can definitely makes our daily lives a lot easier.

Speaking of sprays

Here at WEICON, we have a range of technical sprays on offer. They provide solutions for cleaning, protection, lubrication and maintenance.

Skip product gallery
จารบีสเปรย์ H1 | สารหล่อลื่นสำหรับอุตสาหกรรมอาหาร NSF H1
จารบีสเปรย์ H1
สารหล่อลื่นสำหรับอุตสาหกรรมอาหาร NSF H1
รายละเอียด
โฟมปกป้องมือ | ถุงมือโปร่งแสง ผ่านการทดสอบทางผิวหนัง
โฟมปกป้องมือ
ถุงมือโปร่งแสง ผ่านการทดสอบทางผิวหนัง
รายละเอียด
น้ำยาทำความสะอาดหน้าจอ | น้ำยาทำความสะอาดป้องกันไฟฟ้าสถิตและลดแสงสะท้อน
น้ำยาทำความสะอาดหน้าจอ
น้ำยาทำความสะอาดป้องกันไฟฟ้าสถิตและลดแสงสะท้อน
รายละเอียด
การป้องกันสนิม 2000 PLUS | การเคลือบพื้นผิวที่ทนการกัดกร่อนและสภาพอากาศ
การป้องกันสนิม 2000 PLUS
การเคลือบพื้นผิวที่ทนการกัดกร่อนและสภาพอากาศ
รายละเอียด
สารลบหมากฝรั่ง | ด้วยผลกระทบจากความเย็นทันที
สารลบหมากฝรั่ง
ด้วยผลกระทบจากความเย็นทันที
รายละเอียด
Comment area
Write a comment
Your comment will be released after review.
Weitere Beiträge
  • poster, blue bag, posters, can, roст?
    Rust in swimming pool poles - these tips will help you get rid of it!
    Another summer is nearing its end – and with it, another bathing season, too. Now the swimming pool, which offered a refreshing break during hot days just a few weeks ago, is looking deserted, standing in your garden all alone. When you eventually accept the fact that outdoor temperatures will most likely not shoot up over 20 degrees again this year, you start to disassemble the pool. And that is when you notice it: rust has started to form on the pool poles! But don’t worry – with our tips, you can put a stop to the unwelcome metal enemy fast and easily. We also show you how to prevent rust on swimming pool poles altogether!
    Mehr lesen
  • wood adhesive, cartridge glue, mixing nozzle, two-part epoxy, white bottle
    Repairing ripped-out screws
    One minute, you’re opening the door or drawer of a cupboard and the next, you’re holding the whole furniture front in your hand. A common reason for that? Ripped-out screws, furniture connectors or hinges. Cheap compressed woods, like chipboard or MDF sheets, are particularly vulnerable to these annoying signs of wear. But don’t worry. In this blog post, I’ll explain to you how to repair frayed drill holes and stripped screw holes. One little spoiler beforehand: with a tiny bit of glue, your problem is solved in just a few minutes!
    Mehr lesen