Skip to main content Skip to search Skip to main navigation


Good to know
wood adhesive, syringe applicator, green nozzle, DIY repair

Repairing ripped-out screws

One minute, you’re opening the door or drawer of a cupboard and the next, you’re holding the whole furniture front in your hand. A common reason for that? Ripped-out screws, furniture connectors or hinges. Cheap compressed woods, like chipboard or MDF sheets, are particularly vulnerable to these annoying signs of wear. But don’t worry. In this blog post, I’ll explain to you how to repair frayed drill holes and stripped screw holes. One little spoiler beforehand: with a tiny bit of glue, your problem is solved in just a few minutes!

Classic case: repair of a broken drawer front

In a caravan, so-called pushbutton latches usually make sure that cupboards and drawers stay closed while driving. It just doesn’t really work that way if one of the latches wasn’t locked properly. That’s what happened to my colleague Jan. The result: While driving, one of the drawer fronts in his caravan fell off.

The glue trick

As an expert in the field of adhesives, Jan immediately knew what to do. With our Easy-Mix S 50 Epoxy Adhesive, he bonded the plastic furniture connectors back into the frayed drill holes. But why exactly did Jan choose this adhesive? The answer is quite simple. Easy-Mix S 50 is perfect for fast repairs, it can be used on various materials, like wood, plastic or metal, and shows extremely high adhesive strength. That is why Jan also filled the stripped screw holes with the adhesive and then screwed the connectors back in.

After just 24 hours, the adhesive was fully cured and Jan’s drawer was ready to roll again. Repairing ripped-out screws – it’s not that hard, after all. You only need the right equipment! Here’s one last note on the application: Thanks to the included mixing nozzle, the two-component adhesive can be applied straight from the cartdridge. It is, however, important to dismiss the first five centimetres of the bead, as the mixing ratio is only ideal after that.

Repairing wood damage

Our Repair Stick Wood is also a handy helper when it comes to the fast repair of ripped-out screws and co.! If drill holes are too big, you can easily fill them with this ready-to-use modelling clay. After it is cured, you can drive wood screws back into exactly the same spot as before. To give you a better idea of how the Repair Stick Wood is used, I have added a video showing the repair of a wooden toy.

Our solutions for loose screws

Skip product gallery
กาวซีเมนต์เหล็กชนิดแท่ง ใช้สำหรับซ่อมแซมงานที่เป็นไม้ | ใช้อุดในการซ่อมแซม มีความยื่ดหยุ่น
กาวซีเมนต์เหล็กชนิดแท่ง ใช้สำหรับซ่อมแซมงานที่เป็นไม้
ใช้อุดในการซ่อมแซม มีความยื่ดหยุ่น
รายละเอียด
Easy-Mix S 50 | High-temperature resistant epoxy resin adhesive for fast repair and maintenance work
Easy-Mix S 50
High-temperature resistant epoxy resin adhesive for fast repair and maintenance work
รายละเอียด
กาวล็อคเกลียว AN 305-18  ซีลหน้าแปลน | สำหรับการเชื่อมช่องว่างขนาดใหญ่, แข็งแรงสูง, ความเช้มข้นสูง
กาวล็อคเกลียว AN 305-18 ซีลหน้าแปลน
สำหรับการเชื่อมช่องว่างขนาดใหญ่, แข็งแรงสูง, ความเช้มข้นสูง
รายละเอียด
Comment area
Write a comment
Your comment will be released after review.
More articles
  • poster, blue bag, posters, can, roст?
    Rust in swimming pool poles - these tips will help you get rid of it!
    Another summer is nearing its end – and with it, another bathing season, too. Now the swimming pool, which offered a refreshing break during hot days just a few weeks ago, is looking deserted, standing in your garden all alone. When you eventually accept the fact that outdoor temperatures will most likely not shoot up over 20 degrees again this year, you start to disassemble the pool. And that is when you notice it: rust has started to form on the pool poles! But don’t worry – with our tips, you can put a stop to the unwelcome metal enemy fast and easily. We also show you how to prevent rust on swimming pool poles altogether!
    Read the article now
  • adhesive spray, aerosol can, spray adhesive, white can, red nozzle
    Design of an aerosol can

    Liquids can be evenly distributed and conveniently dispensed using an aerosol can. Since it was first patented in 1927, the aerosol can has become an established component in various areas of life. One of its most popular applications was the invention of hairspray back in the 50's. Whether hairspray, deodorant, paint, cleaner or even whipped cream - today the aerosol can is an inherent part of our daily lives and is used in various areas.


    Read the article now